Keynote Speakers

Mini Symposia

Contributed Papers

Keynote Lectures

Title Authors
RECENT ADVANCES IN ANSYS CFD MULTIPHASE FLOW MODEL DEVELOPMENT, VALIDATION AND APPLICATION Frank, T. (ANSYS)
OpenFOAM: OPEN SOURCE IN COMMERCIAL AND ACADEMIC CFD USE Jasak, H. (Wikki Ltd.)
THE USE OF CFD AT SYNCRUDE: SUCCESSES AND CHALLENGES Hackman, L. (Syncrude)
MULTIPHASE CFD FOR GAS-PARTICLE FLOWS: BEYOND THE TWO-FLUID MODEL Passalacqua, A. and Fox, R.O. (Iowa State University)
BIOREACTOR DEVELOPMENT FOR CARTILAGE TISSUE ENGINEERING: COMPUTATIONAL MODELLING AND EXPERIMENTAL RESULTS Wick, T.M. and Farooque, T. (University of Alabama at Birmingham)
CFD SIMULATION OF FLUID-PARTICLE AND PARTICLE-PARTICLE INTERACTION IN PACKED AND FLUIDISED BEDS Reddy, G.R.K. and Joshi, J.B. (Institute of Chemical Technology, India)
Back to Top

Mini-Symposia - Bio-Engineering

Title Authors
UNSTEADY PARTICLE DEPOSITION IN A HUMAN NASAL CAVITY Se, C.M.K., Inthavong, K. and Tu, J.Y. (RMIT University)
MODELLING SUBMICRON AND MICRON PARTICLE DEPOSITION IN A HUMAN NASAL CAVITY Inthavong, K., Zhang, K. and Tu, J.Y. (RMIT University)
EXTERNAL CHARACTERISTICS OF SPRAY ATOMISATION FROM A NASAL SPRAY DEVICE Fung, M.C., Inthavong, K., Yang, W. and Tu, J.Y. (RMIT University)
MODELLING VARIATIONS IN SHEAR-RATE AROUND A GEOMETRICALLY SIMILAR THROMBUS IN-VITRO Butler, C.J., Sheard, G.J. and Ryan, K. (Monash University)
THE EFFECTS OF VORTEX BREAKDOWN BUBBLES ON THE MIXING ENVIRONMENT INSIDE A BASE DRIVEN BIOREACTOR Cogan, S.J., Sheard, G.J. and Ryan, K. (Monash University)
STABILITY OF OSCILLATORY AND PULSATILE PIPE FLOW Nebauer, J.R.A. and Blackburn, H.M. (Monash University)
EFFECT OF ROTOR BLADE ANGLE AND CLEARANCE ON BLOOD FLOW THROUGH A NON-PULSATILE, AXIAL, HEART PUMP Sinnott, M.D. and Cleary, P.W. (CSIRO)
MULTISCALE MODELLING OF CEREBRAL BLOOD FLOW Bui, A., Manasseh, R., Šutalo, I.D. and Liffman, K. (CSIRO)
COMPUTATIONAL SIMULATION OF RED BLOOD CELL MOTION IN MICROVESSEL BIFURCATIONS Secomb, T.W., Barber, J.O. and Restrepo, J.M. (University of Arizona)
HEMODYNAMIC SIMULATION FOR CONGENITAL HEART DISEASE Liu, J.L., Qian, Y., Umezu, M., Itatani, K. and Miyaji, K. (Waseda University)
Back to Top

Mini-Symposia - Gas-Solid Flows

Title Authors
CFD MODELLING OF ELECTROSTATIC FORCES IN GAS-SOLID FLUIDIZED BEDS AND THE ROLE OF PROCESS UPSETS Rokkam, R.G., Fox, R.O. and Muhle, M.E. (Iowa State University)
NUMERICAL SIMULATION FOR FAST PYROLYSIS OF WOODY BIOMASS IN A BUBBLING FLUIDISED BED REACTOR Choi, H.S., Choi, Y.S. and Kim, S.J. (Korea Institute of Machinery and Materials)
DEVELOPMENT OF A NOVEL HYBRID DISCRETE PARTICLE - IMMERSED BOUNDARY MODEL FOR FLUIDIZED BED MEMBRANE REACTORS de Jong, J.F., van Gerner, J.H., van Sint Annaland, M. and Kuipers, J.A.M. (University of Twente)
CFD SIMULATION OF GAS-SOLID FLOW IN A SPOUTED BED WITH A NON-POROUS DRAFT TUBE Abbaszadeh, A. and Hosseini, S.H. (Islamic Azad University, Ilam Branch )
MODELLING THE FLUID DYNAMICS AND THE GROWTH KINETICS OF FLUIDIZED BED SPRAY GRANULATION Li, Z., Kind, M. and Gruenewald, G. (University of Karlsruhe)
DEM AND TFM SIMULATIONS OF SOLIDS MIXING Godlieb, W., Gorter, S., Deen, N.G. and Kuipers, J.A.M. (University of Twente)
THE EFFECT OF GAS DYNAMICS ON HOPPER DISCHARGE RATES Hilton, J.E., Mason, L.R. and Cleary, P.W. (CSIRO)
EFFECT OF SCREW DESIGN AND PARTICLE SHAPE ON HOPPER DRAW DOWN BY A HORIZONTAL SCREW FEEDER Fernandez, J.W., Cleary, P.W. and McBride, B. (CSIRO)
USING DISTRIBUTED CONTACTS IN DEM TO MODEL GRANULAR SHEAR FLOWS Cummins, S. and Cleary, P.W. (CSIRO)
APPLICATION OF THE PARTICLE IN CELL APPROACH FOR THE SIMULATION OF BUBBLING FLUIDIZED BEDS OF GELDART A PARTICLES Karimipour, S. and Pugsley, T. (University of Saskatchewan)
CFD SIMULATION SCALE-UP OF A DUAL-FLUIDIZED BED GASIFIER FOR BIOMASS Didwania, A.K. and Cattolica, R.J. (University of California)
NUMERICAL INVESTIGATION OF THE COLD SPRAY PROCESS Li, S., Muddle, B., Jahedi, M. and Soria, J. (Monash University)
CHOOSING THE MESH-INDEPENDENT SUB-GRID DRAG COEFFICIENT MODEL Lu, B., Wang, W. and Li, J. (Chinese Academy of Sciences)
EFFECT OF PARTICLES IN A TURBULENT GAS-PARTICLE FLOW WITHIN A 90° BEND Mohanarangam, K., Yang, W., Zhang, H.J. and Tu, J.Y. (RMIT University)
CFD-DEM SIMULATION OF GAS FLUIDIZATION OF ELLIPSOIDAL PARTICLES Zhou, Z.Y., Pinson, D., Zou, R.P. and Yu, A.B. (The University of New South Wales)
COMPUTATIONAL STUDY OF HEAT TRANSFER IN BUBBLING FLUIDIZED BEDS WITH GELDART A POWDER Hou, Q.F., Zhou, Z.Y. and Yu, A.B. (The University of New South Wales)
CFD-DEM MODELLING OF GAS FLUIDIZATION OF PARTICLE MIXTURES WITH SIZE AND DENSITY DIFFERENCES Feng, Y.Q. and Yu, A.B. (CSIRO)
Back to Top

Mini-Symposia - High Temperature Processing

Title Authors
THE EFFECT OF PARTICLE SIZE AND COMPOSITION ON THE PERFORMANCE OF THE COMPOSITE PARTICLE MODEL IN PREDICTING COMBUSTION BEHAVIOUR IN A FLASH FURNACE REACTION SHAFT Solnordal, C.B., Jorgensen, F.R.A. and Russell, R. (CSIRO)
CFD SIMULATION OF SUPERSONIC OXYGEN JET BEHAVIOUR INSIDE A HIGH TEMPERATURE FIELD Alam, M., Naser, J. and Brooks, G.A. (Swinburne University of Technology)
COMPUTATIONAL FLUID DYNAMICS MODEL OF ELECTRIC FURNACE FOR SMELTING NICKEL CALCINE Runstedtler, A., Boisvert, P., Tisdale, D., Greenfield, M., Chui, E. and Majeski, A. (Natural Resources Canada)
NUMERICAL SIMULATION OF MAGNESIUM PRODUCTION BY THE PIDGEON PROCESS PART I: A NEW MODE FOR MAGNESIUM REDUCTION PROCESS IN A HORIZONTAL RETORT Li, R.B., Wei, J.J., Guo, L.J. and Zhang, S.J. (Xi'an Jiaotong University)
NUMERICAL SIMULATION OF MAGNESIUM PRODUCTION BY THE PIDGEON PROCESS PART II: COUPLING OF THE MAGNESIUM REDUCTION IN THE RETORTS WITH THE SURROUNDING THERMAL-FLOW FIELDS IN A COAL-FIRED FURNACE Zhang, S.J., Li, R.B., Wei, J.J. and Guo, L.J. (Xi'an Jiaotong University)
CFD SIMULATION OF FREE SURFACE FLOW AND HEAT TRANSFER OF LIQUID SLAG ON A SPINNING DISC FOR A NOVEL DRY SLAG GRANULATION PROCESS Pan, Y., Witt, P.J. and Xie, D. (CSIRO)
TAILORING OXYGEN DISTRIBUTION IN 300MM CZOCHRALSKI CRYSTAL OF PURE SILICON USING CUSP MAGENETIC FIELD Gunjal, P. and Ramchandran, P. (Washington University in St Louis)
VALIDATION OF SPH PREDICTIONS OF OXIDE GENERATED DURING Al MELT TRANSFER Prakash, M., Pereira, G.G., Cleary, P.W., Rohan, P. and Taylor, J.A. (CSIRO)
CHARACTERIZING LIQUID FILM THICKNESS IN SPINNING DISC REACTORS Bhatelia, T.J., Utikar, R.P., Pareek, V.K. and Tadé, M.O. (Curtin University of Technology)
COMBINED EXPERIMENTAL AND SIMULATION (CFD) ANALYSIS ON PERFORMANCE OF A HORIZONTAL TUBE REACTOR USED TO PRODUCE CARBON NANOTUBES White, R.B. and King, D. (CSIRO)
PHYSICAL AND MATHEMATICAL MODELLING INVESTIGATIONS OF THE MECHANISMS OF SPLASH GENERATION IN BATH SMELTING FURNACES Pan, Y. and Langberg, D. (CSIRO)
SIMULATING AGGLOMERATION OF MOLTEN PARTICLES IN THE FLASH SMELTING REACTION SHAFT Higgins, D., Gray, N. and Davidson, M.R. (The University of Melbourne)
MODELLING THE TAPPING OF SILICON MELT FROM THE SUBMERGED ARC FURNACES Kadkhodabeigi, M., Tveit, H. and Johansen, S.T. (Norwegian University of Science and Technology)
MULTI-PHYSICS ANALYSIS FOR ELECTROMAGNETIC PROCESSING IN CONTINUOUS CASTING OF STEEL BY FINITE VOLUME METHOD APPROACH Toh, T., Takeuchi, E. and Yamamura, K. (Nippon Steel Corporation)
COMPUTER-AIDED ANALYSIS OF FLOW IN A ROTATING SINGLE DISK Shanbghazani, M., Heidarpour, V. and Mirzaee, I. (Islamic Azad University, Iran)
Back to Top

2 Phase Pipe Flow

Title Authors
EXPERIMENTS AND NUMERICAL SIMULATIONS OF HORIZONTAL TWO PHASE FLOW REGIMES Höhne, T. (Forschungszentrum Dresden-Rossendorf e.V.)
INVESTIGATION OF LIQUID-LIQUID TWO PHASE FLOW IN BIODIESEL PRODUCTION de Boer, K. and Bahri, P.A. (Murdoch University)
Back to Top

Aerodynamics

Title Authors
CFD DESIGN OF A GENERIC CONTROLLER FOR VORTEX-INDUCED RESONANCE Antiohos, A.A., Semercigil, S.E. and Turan, O.F. (Victoria University)
TWO-DIMENSIONAL COMPUTATIONAL ANALYSIS OF "HIGH TAIL" CONFIGURATION AIRCRAFT WAKE VORTEX PAIRS Ellis, C.L., Ryan, K. and Sheard, G.J. (Monash University)
SHORT-WAVE INSTABILITY GROWTH IN CLOSELY SPACED VORTEX PAIRS Boustead, N., Ryan, K. and Sheard, G.J. (Monash University)
NUMERICAL PREDICTION OF AIR FLOW IN SHARP 90o ELBOW Mossad, R., Yang, W. and Schwarz, M.P. (University of Southern Queensland)
Back to Top

Alumina Processing

Title Authors
CFD MODELLING OF ALUMINA CALCINER FURNACES Marsh, C. (CFD Design & Engineering)
CFD MODELING OF ALUMINA SLURRY HEAT EXCHANGER HEADERS: (i) COMPARISON OF CFD APPROACHES Bremhorst, K. and Brennan, M.S. (JKMRC University of Queensland)
CFD MODELING OF ALUMINA SLURRY HEAT EXCHANGER HEADERS: (ii) PARAMETRIC STUDIES Brennan, M.S. and Bremhorst, K. (JKMRC University of Queensland)
SURROGATE BASED SENSITIVITY ANALYSIS OF PROCESS EQUIPMENT Stephens, D.W., Gorissen, D. and Dhaene, T. (CSIRO)
PERFORMANCE IMPROVEMENT OF ALUMINA DIGESTERS Kumaresan, T., Thakre, S.S., Basu, B., Kaple, K., Gupta, H.P., Bandi, A., Chaturvedi, P., Roy, N.N., Gararia, S.N., Sapra, V. and Shah, R.P. (Aditya Birla Science & Technology Co Ltd.)
EVALUATION OF TWO-EQUATION TURBULENCE MODELS IN A LABORATORY-SCALE THICKENER FEEDWELL Mohanarangam, K., Stephens, D.W. and Nguyen, T.V. (CSIRO)
Back to Top

Bubbly Flows

Title Authors
COUPLED DPM AND VOF MODEL FOR ANALYSES OF GAS STIRRED LADLES AT HIGHER GAS RATES Olsen, J.E. and Cloete, S. (SINTEF Materials and Chemistry)
DRAG FORCE ON BUBBLES IN BUBBLE SWARMS Roghair, I., van Sint Annaland, M. and Kuipers, J.A.M. (University of Twente)
INFLUENCE OF DRAG FORCES OF A SWARM OF BUBBLES IN ISOTHERMAL BUBBLY FLOW CONDITIONS Li, C., Cheung, S.C.P., Yeoh, G.H. and Tu, J.Y. (RMIT University)
AN OVERALL ASSESSMENT OF ABND MODEL FOR LARGE-SCALE BUBBLY FLOWS Duan, X., Cheung, S.C.P., Yeoh, G.H., Tu, J.Y., Krepper, E. and Lucas, D. (RMIT University)
DIRECT QUADRATURE METHOD OF MOMENTS FOR ISOTHERMAL BUBBLY FLOWS Cheung, S.C.P., Yeoh, G.H. and Tu, J.Y. (RMIT University)
A CONCEPTUAL MODEL FOR GAS-LIQUID INTERACTION AND ITS INTEGRATION INTO CFD SIMULATION OF BUBBLE COLUMNS Yang, N., Chen, J., Ge, W. and Li, J. (Chinese Academy of Sciences)
Back to Top

Coal Processing

Title Authors
NUMERICAL ANALYSIS OF FLUID FLOW AND HEAT TRANSFER THROUGH REACTIVE COAL STOCKPILE Ejlali, A., Aminossadati, S.M. and Ejlali, A. (University of Qld)
INERTISATION OF HIGHWALL MINING TO CONTROL METHANE CONCENTRATIONS AT THE MOURA MINE Mossad, R., Valla, A. and Ballusu, R. (University of Southern Queensland)
COMPARISON OF UCG CAVITY GROWTH WITH CFD MODEL PREDICTIONS Luo, Y., Coertzen, M. and Dumble, S. (Linc Energy)
SIMULATION OF LIQUID-SOLID FLOW IN A COAL DISTRIBUTOR: INHOMOGENEOUS MODEL VS HOMOGENEOUS MODEL Guo, B.Y., Dong, K.J. and Yu, A.B. (The University of New South Wales)
CFD SIMULATION OF UNDERGROUND COAL DUST EXPLOSIONS AND ACTIVE EXPLOSION BARRIERS Humphreys, D., Collecutt, G. and Proud, D. (BMT WBM Pty Ltd)
Back to Top

Combustion

Title Authors
NUMERICAL MODELLING OF BROWN COAL COMBUSTION IN A TANGENTIALLY-FIRED FURNACE Tian, Z.F., Witt, P.J., Schwarz, M.P. and Yang, W. (CSIRO)
DROPLET EVAPORATION ASSISTED BY "STABILIZED COOL FLAMES": SCRUTINIZING ALTERNATIVE CFD MODELLING APPROACHES Kolaitis, D.I., Katsourinis, D.I. and Founti, M.A. (National Technical University of Athens)
A 3D CFD MODELLING STUDY OF A DIESEL OIL EVAPORATION DEVICE OPERATING IN THE "STABILIZED COOL FLAME" REGIME Kolaitis, D.I. and Founti, M.A. (National Technical University of Athens)
COMPUTATIONAL FLUID DYNAMICS MODELLING OF POROUS BURNERS Tierney, C., Wood, S., Harris, A.T. and Fletcher, D.F (University of Sydney)
NUMERICAL MODELING OF IN-CYLINDER FLUID FLOW IN INTERNAL COMBUSTION ENGINES USING REYNOLDS STRESS TURBULENCE MODEL Khaleghi, H. and Nabifar, M.R. (Tarbiat Modares University)
PREDICTION OF BURNING RATE OF AN ACCIDENTALLY RELEASED FLAMMABLE FUEL BY MEANS OF CFD SIMULATION Mishra, K.B., Wehrstedt, K.D. and Schönbucher, A. (BAM Federal Institute for Materials Research and Testing)
THE 3-D SIMULATION WITH DETAILED CHEMICAL KINETICS OF THE TURBULENT COMBUSTION IN A PRE-CHAMBER INDIRECT INJECTION DIESEL ENGINE Xia, F., Liu, C. and Karim, G. (University of Calgary)
MODELING THE REACTIVE PROCESSES WITHIN A CATALYTIC POROUS MEDIUM Shahamiri, S.A. and Wierzba, I. (University of Calgary)
Back to Top

DEM

Title Authors
COMPREHENSIVE DEM-DPM-CFD SIMULATIONS - MODEL SYNTHESIS, EXPERIMENTAL VALIDATION AND SCALABILITY Kloss, C., Goniva, C., Aichinger, G. and Pirker, S. (Christian Doppler Laboratory on Particulate Flow Modelling)
THE ROLE OF PARTICLE SHAPE IN PNEUMATIC CONVEYING Hilton, J.E. and Cleary, P.W. (CSIRO)
VALIDATION OF DEM PREDICTIONS OF GRANULAR FLOW AND SEPARATION EFFICIENCY FOR A HORIZONTAL LABORATORY SCALE WIRE MESH SCREEN Delaney, G.W., Cleary, P.W., Hilden, M. and Morrison, R.D. (CSIRO)
SCREW CONVEYOR PERFORMANCE: COMPARISON OF DISCRETE ELEMENT MODELLLING WITH LABORATORY EXPERIMENTS Owen, P.J. and Cleary, P.W. (CSIRO)
PREDICTING PRESSURE DROP IN PNEUMATIC CONVEYING USING THE DISCRETE ELEMENT MODELING APPROACH Singh, V. and Lo, S. (CD-Adapco)
COUPLED DEM - CFD MODELLING OF THE IRONMAKING BLAST FURNACE Adema, A., Yang, Y. and Boom, R. (Delft University of Technology)
Back to Top

Drag Force

Title Authors
2D SIMULATIONS OF INTERFACIAL INSTABILITIES AT DEFORMABLE SINGLE DROPLETS Bäumler, K., Wegener, M., Bänsch, E. and Paschedag, A. (FAU Erlangen Nürnberg)
NUMERICAL SIMULATIONS OF BUBBLE DISPERSION OVER A HYDROFOIL Zhu, S.J., Ooi, A., Blackburn, H. and Anderson, B. (The University of Melbourne)
CFD MODELLLING OF LIQUID JET BREAKUP IN CROSSFLOWS Kuan, B. (CSIRO)
SPH MODELLING OF FLUID FLOW AT THE GRAIN LEVEL IN A POROUS MEDIUM Pereira, G.G., Prakash, M. and Cleary, P.W. (CSIRO)
INTERFACE-TURBULENCE INTERACTIONS AND BUBBLE DYNAMICS Liovic, P. and Lakehal, D. (CSIRO)
Back to Top

Environmental Flows

Title Authors
SIMULATION OF OFFGAS SCRUBBING BY A COMBINED EULERIAN-LANGRANGIAN MODEL Goniva, C., Tukovic, Ž., Feilmayr, C., Bürgler, T. and Pirker, S. (Christian Doppler Laboratory on Particulate Flow Modelling)
CO DISPERSION IN A CAR-REPAIR SHOP: AN EXPERIMENTAL AND CFD MODELLING STUDY Asimakopoulou, E., Kolaitis, D.I. and Founti, M.A. (National Technical University of Athens)
INVESTIGATION OF ELECTROSTATIC PRECIPITATOR CHAR COLLECTOR DESIGNS USING COMPUTATIONAL FLUID DYNAMICS Vun, S., Campbell, A.P. and Horrocks, J. (Worley Parsons)
DEMANDS ON TURBULENCE MODELLLING FOR VENTILATED ROOM AIRFLOWS Heschl, C., Sanz, W. and Lindmeier, I. (Fachhochschulstudiengänge Burgenland GmbH – University of Applied Science)
NUMERICAL SIMULATION OF GAS FLOW IN AN ELECTROSTATIC PRECIPITATOR Hou, Q.F., Guo, B.Y., Li, L.F. and Yu, A.B. (The University of New South Wales)
Back to Top

Flotation

Title Authors
CFD SIMULATION OF GAS-LIQUID FLOW IN A LARGE SCALE FLOTATION CELL Song, T., Zhou, J.W. and Shen, Z.C. (Beijing General Research Institute of Mining and Metallurgy)
MAPPING OF COLLISION REGIMES IN FLOTATION MODELLING Wierink, G., Tiitinen, J. and Heiskanen, K. (Helsinki University of Technology)
CFD MODELS OF MICROCEL AND JAMESON FLOTATION CELLS Koh, P.T.L. and Schwarz, M.P. (CSIRO)
COMPARISON OF A COMPUTATIONAL MODEL OF SINGLE BUBBLE COLLECTION EFFICIENCY IN A HALLIMOND TUBE Hasan, N. (The University of Newcastle)
Back to Top

Flow Past Objects

Title Authors
GRID CONVERGENCE STUDY FOR A TWO-DIMENSIONAL SIMULATION OF FLOW AROUND A SQUARE CYLINDER AT A LOW REYNOLDS NUMBER Ali, M.S.M., Doolan, C.J. and Wheatley, V. (The University of Adelaide)
WALL Y+ APPROACH FOR DEALING WITH TURBULENT FLOW OVER A SURFACE MOUNTED CUBE: PART 1 - LOW REYNOLDS NUMBER WALL Y+ APPROACH FOR DEALING WITH TURBULENT FLOW OVER A SURFACE MOUNTED CUBE: PART 2 - HIGH REYNOLDS NUMBER Ariff, M., Salim, S.M. and Cheah, S.C. (Nottingham University (Malaysia))
A QUASI-TWO-DIMENSIONAL INVESTIGATION OF UNSTEADY TRANSITION IN SHALLOW FLOW PAST A CIRCULAR CYLINDER IN A CHANNEL Hussam, W.K., Sheard, G.J. and Thompson, M.C. (Monash University)
Back to Top

Fluid Dynamics

Title Authors
2-D NEWTONIAN FLOW PAST ELLIPSOIDAL PARTICLES AT MODERATE REYNOLDS NUMBERS Kumar, N.N. and Kishore, N. (National Institute of Technology, India)
NUMERICAL STUDIES OF HIGH REYNOLDS NUMBER FLOW PAST A STATIONARY AND ROTATING SPHERE Poon, K.W., Iaccarino, G., Ooi, A. and Giacobello, M. (The University of Melbourne)
LOW REYNOLDS NUMBER UNSTEADY AERODYNAMIC CHARACTERISTICS OF FLAPPING CORRUGATED AIRFOIL Sun, W.H., Miao, J.M., Yu, H.T., Tai, C.H, Hung, C.C. and Hsu, U.K. (National Defense University, Taiwan)
MODELLING SLOSHING IN LNG TANKS Rudman, M. and Cleary, P.W. (CSIRO)
SHORT-WAVE INSTABILITIES ON A VORTEX PAIR OF UNEQUAL STRENGTH CIRCULATION RATIO So, J., Ryan, K. and Sheard, G.J. (Monash University)
VISCOUS LIQUID AIR-MIXING: INFLUENCE OF LIQUID DENSITY RATIO Prakash, M., Korman, B. and Cleary, P.W. (CSIRO)
SHEAR LAYER REATTACHMENT ON A SQUARE CYLINDER WITH INCIDENCE ANGLE VARIATION Dhopade, P. and Sheard, G.J. (Monash University)
RESTRICTED REGIONS OF RAYLEIGH-BÉNARD-MARANGONI CONVECTION IN SOLUTE TRANSFER BETWEEN GAS-LIQUID PHASES Fahmy, M., Sun, Z. and Molteno, T. (University of Otago, New Zealand)
Back to Top

Fluid Structure

Title Authors
PREDICTING THE DYNAMIC STRUCTURAL RESPONSE CONTROLLED BY A SLOSHING ABSORBER USING SPH Marsh, A.P., Prakash, M., Semercigil, S.E. and Turan, O.F. (Victoria University)
A FINITE ELEMENT BASED PREDICTION MODEL TO CONTROL LIQUID SLOSHING WITH CONTAINER FLEXIBILITY Gradinscak, M., Semercigil, S.E. and Turan, O.F. (Victoria University)
SIMULATIONS OF HUMAN SWIMMING USING SMOOTHED PARTICLE HYDRODYNAMICS Cohen, R., Cleary, P.W. and Mason, B. (CSIRO)
USING SMOOTHED PARTICLE HYDRODYNAMICS TO STUDY WAVE IMPACT ON FLOATING OFFSHORE PLATFORMS: THE EFFECT OF MOORING SYSTEM Rudman, M. and Cleary, P.W. (CSIRO)
Back to Top

Heat Transfer

Title Authors
A CFD MODEL FOR SIMULATING HIGH PRESSURE THERMAL (HPT) PROCESSING - IMPACT OF MATERIAL PROPERTIES AND PROCESSING CONDITIONS ON PREDICTION ACCURACY Knoerzer, K. and Versteeg, C. (CSIRO)
THE INFLUENCE OF HEIGHT RATIO ON RAYLEIGH-NUMBER SCALING AND STABILITY OF HORIZONTAL CONVECTION Sheard, G.J. and King, M.P. (Monash University)
NUMERICAL STUDY ON THE EFFUSION COOLING PERFORMANCE OVER THE WALLS OF AN ANNULAR BURNER Sun, W.H., Huang, C.J., Wu, C.Y. and Miao, J.M. (National Defense University, Taiwan)
CFD MODELLING OF A SUBTERRANEAN BUSBAR FOR THERMAL PERFORMANCE Campbell, A.P., Abdel-Jawad, M., Appleby, S. and Servant, G. (Worley Parsons)
Back to Top

Hydrocyclones

Title Authors
CFD MODELLING OF HYDROCYCLONES: VALIDATION AGAINST PLANT HYDRODYNAMIC PERFORMANCE Brennan, M.S., Holtham, P.N. and Narasimha, M. (JKMRC University of Queensland)
TURBULENCE MODEL ANALYSIS OF FLOW INSIDE A HYDROCYCLONE Stephens, D.W. and Mohanarangam, K. (CSIRO)
MODELLING THE MULTIPHASE FLOW IN DENSE MEDIUM CYCLONES Chu, K.W., Wang, B., Yu, A.B. and Vince, A. (The University of New South Wales)
Back to Top

Industrial Applications

Title Authors
CFD MODELLLING OF A NOVEL GRAVITY SEPARATION DEVICE Solnordal, C.B., Hughes, T., Gray, S. and Schwarz, M.P. (CSIRO)
ENHANCED PROBLEM SOLVING; THE INTEGRATION OF CFD AND OTHER ENGINEERING APPLICATIONS Haywood, R.J., Taylor, W., Pliakas, T., Tedford, N. and Warnica, D. (Hatch)
INDUSTRIAL APPLICATION OF CFD – A REVIEW OF FEW EXAMPLES Naser, J. (Swinburne University of Technology)
Back to Top

Industrial Process Flows

Title Authors
VALIDATION OF LES PREDICTIONS FOR TURBULENT FLOWS IN A CONFINED IMPINGING JET REACTOR Icardi, M., Gavi, E., Marchisio, D.L., Olsen, M.G., Fox, R.O. and Lakehal, D. (Politecnico di Torino)
CFD SIMULATION OF A SOLVENT EXTRACTION PUMP MIXER UNIT: EVALUATING LARGE EDDY SIMULATION AND RANS BASED MODELS Tabib, M., Lane, G., Yang, W. and Schwarz, M.P. (CSIRO)
DEVELOPMENT OF BUBBLE DRIVEN FLOW CFD MODEL APPLIED FOR ALUMINIUM SMELTING CELLS Feng, Y.Q., Yang, W., Cooksey, M.A. and Schwarz, M.P. (CSIRO)
Back to Top

Kilns

Title Authors
NUMERICAL ANALYSIS OF THE HEAT TRANSFER IN THE WALL OF ROTARY KILN USING FINITE ELEMENT METHOD ANSYS Sonavane,Y. and Specht, E. (Otto von Guericke University)
CFD MODELING OF A CEMENT KILN WITH MULTI CHANNEL BURNER FOR OPTIMIZATION OF FLAME PROFILE Bhad, T.P., Sarkar, S., Kaushik, A. and Herwadkar, S.V. (Larsen & Toubro Limited)
CFD-MODELLING OF SELECTIVE NON-CATALYTIC REDUCTION OF NOx IN GRATE-KILN PLANTS Burström, P.E.C., Lundström, T.S., Marjavaara, B.D. and Töyrä, S. (Lulea University of Technology)
CFD MODELLING OF THE FLOW THROUGH A GRATE-KILN Granström, B.R., Lundström, T.S., Marjavaara, B.D. and Töyrä, S. (Lulea University of Technology)
STREAK PATTERNS IN BINARY GRANULAR MEDIA IN A ROTARY CLASSIFIER Pereira, G.G., Pucilowski, S., Liffman, K. and Cleary, P.W. (CSIRO)
PREDICTING ENERGY DISSIPATION CHARACTERISTICS OF A TUMBLING GRANULAR-FLOW DAMPER USING DEM Dragomir, S., Sinnott, M.D., Semercigil, S.E. and Turan, O.F. (CSIRO)
KILN AERODYNAMICS VISUALISATION OF MERGING FLOW BY USAGE OF PIV AND CFD Larsson, I.A.S., Lindmark, E.M., Lundström, T.S., Marjavaara, D. and Töyrä, S. (Lulea University of Technology)
CFD MODELLING OF PULVERIZED COAL COMBUSTION IN A ROTARY LIME KILN Macphee, J.E., Sellier, M., Jermy, M. and Tadulan, E. (Canterbury University)
Back to Top

Micro-Fluidics

Title Authors
FORMATION OF UNIFORMLY-SIZED DROPLETS FROM CAPILLARY JET BY ELECTROMAGNETIC FORCE Shimasaki, S. and Taniguchi, S. (Tokoku University)
COMPLEX FLUID MIXING IN MICRO-FLUIDIC DEVICES: THEORY AND SIMULATIONS Dhondi, S. and Pereira, G.G. (CSIRO)
TWO-PHASE FLOW ANALYSIS AND EXPERIMENTAL INVESTIGATION OF MICRO-PIV FOR EMITTER MICRO-CHANNELS Wei, Z., Cao, M., Tang, Y. and Lu, B. (Xi'an Jiaotong University)
ELECTRO-OSMOTIC EFFECTS IN LOW REYNOLDS NUMBER FLOW THROUGH A PLANAR MICROFLUIDIC CONTRACTION-EXPANSION Biscombe, C.J.C., Davidson, M.R. and Harvie, D.J.E. (The University of Melbourne)
Back to Top

Multiphase Turbulence

Title Authors
DEVELOPING MULTIPHASE AND REACTING TURBULENCE MODELS Zhou, L.X. (Tsinghua University)
Back to Top

Non-Newtonian

Title Authors
DNS OF TURBULENT NON-NEWTONIAN FLOW IN AN OPEN CHANNEL Guang, R.Y., Rudman, M., Chryss, A. and Bhattacharya, S. (RMIT University)
RHEOLOGICAL AND FLOW MODELLING OF VISCOELASTIC FLUIDS BETWEEN ECCENTRIC CYLINDERS Grecov, D. and Liu, K. (University of British Columbia)
Back to Top

Novel Applications

Title Authors
IMPLEMENTATION OF MOVING BOUNDARIES IN SPECTRAL-ELEMENT SOFTWARE Hillier, D.R., Ryan, K. and Sheard, G.J. (Monash University)
NUMERICAL SIMULATION OF PULSED ELECTRIC FIELDS (PEF) PROCESSING FOR CHAMBER DESIGN AND OPTIMISATION Schroeder, S., Buckow, R. and Knoerzer, K.(CSIRO)
SIMULATION OF THE FILLING OF POLYETHYLENE- TEREPHTHALATE- BOTTLES (PET) WITH A VOLUMETIC SWIRL CHAMBER VALVE (VODM 40355) ON THE BASIS OF CALCULATION MODELS AND EXPERIMENTS Hain, K., Wels, H. and Muhr, M. (University of Applied Science)
CFD MODELLING OF THE ACOUSTIC STREAMING INDUCED BY AN ULTRASONIC HORN REACTOR Trujillo, F.J. and Knoerzer, K. (CSIRO)
Back to Top

Pipeline Flows

Title Authors
PREDICTION OF WAX DEPOSITION IN PIPELINE BY CFD TECHNIQUES Seyedinezhad, H. and Hormozi, F. (Semnan University, Iran)
SIMULATION OF INTERMITTENT FLOW IN MULTIPHASE OIL AND GAS PIPELINES Issa, R. (Imperial College, UK)
THE FEASIBILITY OF SMOOTHED PARTICLE HYDRODYNAMICS FOR MULTIPHASE OILFIELD SYSTEMS Dickenson, P. (Cambridge University)
Back to Top

Slurry Flows

Title Authors
SLURRY EROSION IN COMPLEX FLOWS: EXPERIMENT AND CFD Graham, L.J. W., Lester, D. and Wu, J. (CSIRO)
SLURRY FLOW IN A TOWER MILL Sinnott, M.D., Cleary, P.W. and Morrison, R.D. (CSIRO)
CFD MODELLING OF FLOATING AND SETTLING PHASES IN SETTLING TANKS Mohanarangam, K. and Stephens, D.W. (CSIRO)
Back to Top

Stirred Tanks

Title Authors
SIMULATIONS OF THIXOTROPIC LIQUIDS Derksen, J. (University of Alberta)
PARTICLE VELOCITY AND CONCENTRATION PROFILES OF SAND - WATER SLURRY IN STIRRED TANK - MEASUREMENTS AND MODELLING Syrjänen, J., Haavisto, S., Koponen, A. and Manninen, M. (VTT technical Research of Finland)
CFD STUDY OF SLURRY HOMOGENIZER Kandakure, M., Vitankar, V., Basu, B., Srivatsan, R. and Nagaraj, H. (Aditya Birla Science & Technology Co Ltd.)
COMPUTATIONAL FLUID DYNAMICS IN THE PULP AND PAPER INDUSTRY - THE DESIGN OF A HIGH PERFORMANCE PULP SCREEN ROTOR Olson, J.A., Delfel, S., Ollivier-Gooch, C. and Gooding, R.W. (University of British Columbia)
CFD SIMULATION OF A CONICAL-CYLINDRICAL CRYSTALLIZATION UNIT USING MULTI-PHASE EULERIAN MODEL Mahdi, K.A., Al-Rashed, M.H., Alsairafi, A.A. and Wójcik, J. (Kuwait University)
Back to Top

Wall Effects

Title Authors
FLOW MODE CHARACTERISATION OF LIQUID FILMS FALLING ON HORIZONTAL PLAIN CYLINDERS Jafar, F.A., Thorpe, G.R. and Turan, O.F. (Victoria University)
NUMERICAL SIMULATION OF HEAT TRANSFER OF NANOFLUIDS IN AN ENCLOSURE Sharma, S. and Gupta, A.V. (Birla Institute of Technology & Science)
DEVELOPMENT OF A BOUNDARY CONDITION WALL FUNCTION FOR PARTICULATE FOULING CFD MODELING Johnsen, S.G. and Johansen, S.T. (SINTEF Materials and Chemistry)
Back to Top

Welding

Title Authors
CFD MODELLING OF ARC WELDING - THE IMPORTANCE OF THE ARC PLASMA Murphy, A.B., Tanaka, M., Yamamoto, K., Tashiro, S. and Lowke, J.J. (CSIRO)
INVESTIGATION OF FLOW DYNAMICS AND PLASTIC DEFORMATION IN ARC WELDING USING SPH Das, R. and Cleary, P.W. (CSIRO)
Back to Top