Schedule - CSIRO Fifth International Conference in the Process Industries 2006

Home

Schedule

Papers By Topic

Papers By Author

Conference Info

Sponsors

About CSIRO

Wed	Thur	Fri
Session 1	Session 1	Session 1
Session 2	Session 2	Session 2
Session 3	Session 3	Session 3
Vendors	Posters	-

Wednesday - Session 1 (Ballroom 3)

Time	Title	Author
9:20AM	A PHOENIX FROM THE ASHES: COMPUTATIONAL FLUID DYNAMICS AT BHPBILLITON TECHNOLOGY	Keynote Lecture Andrew Shook (BHP Billiton)
9:55AM	TRANSPORT PROCESSES AND BUBBLE DRIVEN FLOW IN THE HALL-HEROULT CELL	LI Kiss (Université du Québec à Chicoutimi)
10:20AM	CFD MODEL OF BUBBLE DRIVEN FLOW IN ALUMINIUM REDUCTION CELLS AND VALIDATION USING PIV MEASUREMENT	YQ Feng, W Yang, M Cooksey and MP Schwarz (CSIRO Minerals)
11:10AM	TIME DEPENDENT ELECTRIC, MAGNETIC AND HYDRODYNAMIC INTERACTION IN ALUMINIUM ELECTROLYSIS CELLS	V Bojarevics and K Pericleous (University of Greenwich, UK)
11:30AM	A NEW MODEL FOR INTERFACIAL MHD INSTABILITIES IN ALUMINIUM REDUCTION CELLS	M Kadkhodabeigi and Y Saboohi (Sharif University)
11:50AM	DISCRETE AND CONTINUOUS MODELLING OF REACTIVE PELLETS AND GAS TRANSPORT IN PYROMETALLURGICAL BATHS	PW Cleary, N Stokes, J Ha and M Prakash (CSIRO Mathematical & Information Sciences)
12:10PM	MODELLING OF COLD METAL EXTRUSION USING SPH	M Prakash and PW Cleary (CSIRO MIS)
1:30PM	CFD MODELLING OF FLOW AND HEAT TRANSFER IN INDUSTRIAL APPLICATIONS	Keynote Lecture SV Patankar (University of Minnesota)
2:20PM	FLOW INSTABILITY IN AN ALUMINA PRECIPITATOR FITTED WITH A DRAFT TUBE CIRCULATOR	G Lane (CSIRO Minerals)
2:40PM	USE OF CFD TO PREDICT AND REDUCE EROSION IN AN INDUSTRIAL SLURRY PIPING SYSTEM	GJ Brown (Alcoa World Alumina, Australia)
3:00PM	COUPLED POPULATION BALANCE AND CFD MODEL FOR A CONTINUOUS GIBBSITE CRYSTALLISER	AR Heath and I Livk (CSIRO Minerals)
3:50PM	STIRRING OF MELTS USING ROTATING AND TRAVELING MAGNETIC FIELDS	J Stiller, K Koal, K Fraña and R Grundmann (TU Dresden)
4:10PM	ELECTROMAGNETIC CONTROL OF A TRANSITIONAL BOUNDARY LAYER	T Albrecht, R Grundmann, G Mutschke and G Gerbeth (TU Dresden)
4:30PM	MODELLING OF SEPARATION OF METAL IONS IN A MICROFLUIDIC CHIP	A Bui, Y Zhu and K Petkovic-Duran (CSIRO MMT)
5:00PM	VENDOR SESSION

Wednesday - Session 2 (Ballroom 2)

Time	Title	Author
9:55AM	DIRECT NUMERICAL SIMULATION OF HEAT TRANSPORT IN DISPERSED GAS-LIQUID TWO-PHASE FLOW USING A FRONT TRACKING APPROACH	NG Deen, M van Sint Annaland and JAM Kuipers (University of Twente, The Netherlands)
10:20AM	A CFD STUDY OF THE BUBBLE DEFORMATION DURING DETACHMENT	A Bui and R Manasseh (CSIRO MMT)
11:10AM	DRYING OF A LIQUID DROPLET SUSPENDED IN A BINARY ATMOSPHERE	GJ Oberman, TW Farrell, IW Turner and EA Sizgek (Queensland University of Technology)
11:30AM	SIMULATION OF HEAT TRANSFER AND FLUID FLOW IN A POROUS BED OF IRON ORE PELLETS DURING UP-DRAUGHT DRYING	AL Ljung, TS Lundström and K Tano (Division of Fluid Mechanics, Luleä, Sweden)
11:50AM	AIR FLOW PATTERNS IN AN INDUSTRIAL MILK POWDER SPRAY DRYER	JR Gabites, J Abrahamson, J A Winchester (University of Canterbury, New Zealand)
12:10PM	APPLICATION OF COMPUTATIONAL FLUID DYNAMICS MODELLING ON THE GRATE-KILN PROCESS AT LKAB	U Sjöström, M Lundqvist and O Eriksson (MEFOS, Sweden)
2:20PM	EXPERIMENTAL AND MODELLING INVESTIGATIONS OF DROPLET DISPERSION IN A TURBULENT JET	JJ Nijdam, TAG Langrish and DF Fletcher (University of Sydney)
2:40PM	THREE-DIMENSIONAL SIMULATIONS OF MASS TRANSFER AT SINGLE DROPLETS	AR Paschedag and M Wegener (TU Berlin)
3:00PM	SWIRL TUBES AS AN IN-LINE GAS-LIQUID SEPARATOR	PV Cueille, ES Rosa, G Sanchez-Soto, N Noui-Mehidi and M Rivero (CSIRO MMT)
3:50PM	LIQUID SLOSHING IN FLEXIBLE CONTAINERS, PART 1: TUNING CONTAINER FLEXIBILITY FOR SLOSHING CONTROL	M Gradinscak, S E Semercigil and OF Turan (Victoria University)
4:10PM	LIQUID SLOSHING IN FLEXIBLE CONTAINERS, PART 2: USING A SLOSHING ABSORBER WITH A FLEXIBLE CONTAINER FOR STRUCTURAL CONTROL	M Gradinscak, S E Semercigil and OF Turan (Victoria University)
4:30PM	ANALYSIS OF CURRENT-INDUCED FORCES ON OFFSHORE PIPELINE BUNDLES	M Kamaruddin, KP Thiagarajan, A Czajko (University of Western Australia)
5:00PM	VENDOR SESSION

Wednesday - Session 3 (Ballroom 1)

Time	Title	Author
9:55AM	A MULTI-SCALE / MULTI-PHYSICS MODELING FRAMEWORK FOR SOLIDIFICATION SYSTEMS	VR Voller (St Anthony Falls Laboratory, University of Minnesota)
10:20AM	FLUID FLOW AND INCLUSION REMOVAL IN MOLTEN STEEL CONTINUOUS CASTING STRANDS	L Zhang (Norwegian University of Science & Technology, Norway)
11:10AM	PRELIMINARY SPH MODELLING OF OXIDE FORMATION DURING THE MOULD FILLING PHASE IN DC CASTING OF EXTRUSION BILLETS	M Prakash, J Ha, PW Cleary and J Grandfield (CSIRO MIS)
11:30AM	PHYSICAL AND MATHEMATICAL MODELLING OF SWIRLING FLOW TUNDISH	QF Hou, HY Wang, Q Yue, Z SZou and AB Yu (University of New South Wales)
11:50AM	FLUID FLOW, HEAT TRANSFER AND INCLUSION MOTION IN MOLTEN STEEL CONTINUOUS CASTING TUNDISHES	L Zhang (Norwegian University of Science & Technology (NTNU) Norway)
12:10PM	MECHANISM OF THE DRIFT FLOW IN CONTINUOUS CASTING AND THE EFFECT ON THE DRIFT FLOW USING THE ELECTROMAGNETIC FIELD	K Satou, R Hirayama, K Fujisaki, S Taniguchi, S Satou (Tohoku University, Nippon Steel)
2:20PM	TAPPING OF STRATIFIED LIQUIDS FROM A PACKED BED	A Ashrafian, S Tore Johansen (SINTEF, Norway)
2:40PM	CFD MODELLING ASSISTANCE FOR THE DESIGN OF ELECTRIC FURNACE SLAG TAPHOLE BREAST PLATES	M Trapani, AP Campbell and D Montgomerie (BHP Billiton Olympic Dam Smelter)
3:00PM	THE POLOKWANE SMELTER MATTE TAPPING CHANNEL MODEL	CA Snyders, JJ Eksteen and A Moshokwa (Anglo Platinum)
3:50PM	COMPUTATIONAL FLUID DYNAMICS SIMULATION OF PYROMETALLURGICAL PROCESSES	Y Yang, B Zhou, JR Post, E Scheepers, MA Reuter and R Boom (Delft University of Technology, The Netherlands)
4:10PM	MATHEMATICAL MODELLING OF FLOWS AND TEMPERATURE DISTRIBUTIONS IN THE BLAST FURNACE HEARTH	D Maldonado, P Zulli, B Y Guo and AB Yu (Bluescope Steel Research Laboratories)
4:30PM	A CFD MODEL OF A SUBMERGED ARC FURNACE FOR PHOSPHOROUS PRODUCTION	E Scheepers, A T Adema, Y Yang, R Boom and MA Reuter (Delft University of Technology, The Netherlands)
5:00PM	VENDOR SESSION

Vendor Session - New Developments in Software and Hardware

Time	Title
5:00PM	ATD International
5:10PM	Computer Transition Systems
5:20PM	LEAP Australia
5:30PM	Worley Parsons
5:40PM	Xian Qiao (Australia) Pty Ltd and China Nonferrous Metals Processing Technology - Suzhou New Changguang Thermal Technology Co, Ltd.
5:50PM	Panel Discussion

Thursday - Session 1 (Ballroom 3)

Time	Title	Author
9:00AM	STRUCTURE-ORIENTED MULTI-SCALE SIMULATION OF GAS-SOLID TWO-PHASE FLOWS - METHODOLOGY AND APPLICATION	Keynote Lecture Professor Jinghai Li (Chinese Academy of Sciences)
9:50AM	COARSE-GRAINING OF TWO-FLUID MODELS FOR FLUIDIZED GAS-PARTICLE SUSPENSIONS	Y Igci, S Sundaresan, S Pannala, T O'Brien and R W Breault (National Energy Technology Laboratory)
10:15AM	HETEROGENEOUS PHENOMENA OF BUBBLE FLOW IN GAS-FLUIDISED BEDS	X Dong and AB Yu (University of New South Wales)
11:05AM	POSTER SESSION
11:30AM	A DISTINCT ELEMENT GRANULAR SOLVER/FICTITIOUS DOMAIN METHOD FOR THE NUMERICAL SIMULATION OF PARTICULATE FLOWS	A Wachs and Y Peysson (Institut Français du Pétrole)
11:50AM	AN ISOTHERMAL MODEL OF AGGLOMERATION IN A FLASH SMELTING REACTION SHAFT	D Higgins and M Davidson (Melbourne University)
12:10PM	NUMERICAL SIMULATION AND VALIDATION OF TURBULENT GAS-PARTICLE FLOW IN A BACKWARD-FACING STEP	K Mohanarangam, J.Y.Tu and L Chen (RMIT University)
1:30PM	UNDERSTANDING FROTH BEHAVIOUR WITH CFD	Keynote Lecture Jan Cilliers (Royal School of Mines, Imperial College)
2:20PM	DIRECT NUMERICAL SIMULATION OF PARTICLE MIXING IN DISPERSED GAS-LIQUID-SOLID FLOWS USING A COMBINED VOLUME OF FLUID AND DISCRETE PARTICLE APPROACH	NG Deen, M van Sint Annaland and JAM Kuipers (University of Twente, The Netherlands)
2:40PM	NUMERICAL ANALYSIS OF GAS FLOW-SLAG SURFACE INTERACTION IN BLAST FURNACE	BY Guo, P Zulli, D Maldonado and AB Yu (University of NSW)
3:00PM	DILUTE GAS-SOLID FLOW IN MILL-DUCT BIFURCATION: CFD SIMULATION AND EXPERIMENTAL VALIDATION	B Kuan, W Yang, C Solnordal and MP Schwarz (CSIRO Minerals)
3:20PM	A TWO-DIMENSIONAL MODEL FOR THE HEAP BIOLEACHING OF CHALCOCITE: EFFECT OF INLET HEIGHT	MJ Leahy, MR Davidson, MP Schwarz (CSIRO Minerals)
4:10PM	INVESTIGATION OF THE INFLUENCE OF BUBBLE-BUBBLE INTERACTIONS ON THE HYDRODYNAMICS OF BUBBLING GAS-SOLID FLUIDISED BEDS USING THE DISCRETE BUBBLE MODEL	JA Laverman, M van Sint Annaland and JAM Kuipers (Dutch Polymer Institute, The Netherlands)
4:30PM	INCLUSION OF A SOLID MECHANICS BASED SOLIDS RHEOLOGY MODEL INTO THE KINETIC THEORY OF GRANULAR FLOW	S Vun, J Naser and PJ Witt (Swinburne University of Technology)
4:50PM	COMPUTATIONAL SIMULATION OF MASS TRANSFER AND CHEMICAL REACTIONS AT COMPONENT SURFACES IN FLUIDISED BED HEAT TREATMENT FURNACES	WM Gao, LX Kong, DM Fabijanic and PD Hodgson (Deakin University)
5:10PM	APPLICATION OF CFD FOR TRANSIENT MULTPHASE FLOW AND REACTION MODELLING IN A RISER	N Novia, MS Ray and VK Pareek (Curtin University of Technology)

Thursday - Session 2 (Ballroom 2)

Time	Title	Author
9:50AM	FINITE ELEMENT SIMULATION OF UNSTEADY FLOWS IN SECONDARY SETTLING TANKS	D Kleine, BD Reddy (University of Cape Town, South Africa)
10:15AM	POPULATION BALANCE - CFD MODELLING OF FLUID FLOW, SOLIDS DISTRIBUTION AND FLOCCULATION IN THICKENER FEEDWELL	TV Nguyen, A Heath, and PJ Witt (CSIRO Minerals)
11:05AM	POSTER SESSION
11:30AM	CFD MODEL OF A SELF-AERATING FLOTATION CELL	PTL Koh and MP Schwarz (CSIRO Minerals)
11:50AM	COMPUTATIONAL MODELLING AND VALIDATION OF ULTRAFINE PARTICLE FLOTATION	PF George, AV Nguyen and GJ Jameson (The University of Newcastle)
12:10PM	CFD-BASED MULTISCALE MODELLING OF BUBBLE-PARTICLE COLLISION EFFICIENCY WITH MOBILE BUBBLE SURFACE IN A TURBULENT ENVIRONMENT	TY Liu, PTL Koh and MP Schwarz (CSIRO Minerals)
2:20PM	MODELLING FLUID FLOWS IN SPLIT-FEED FEEDWELLS	RB White, ID Šutalo and TV Nguyen (CSIRO )
2:40PM	COMPUTATIONAL VALIDATION AND EXTENSION OF THE GENERALISED SUTHERLAND EQUATION FOR BUBBLE-PARTICLE ENCOUNTER EFFICIENCY IN FLOTATION	CM Nguyen and AV Nguyen (The University of Newcastle, Australia)
3:00PM	CFD-BASED ESTIMATION OF COLLISION PROBABILITIES BETWEEN FINE PARTICLES AND BUBBLES HAVING INTERMEDIATE REYNOLDS NUMBER	M Nadeem, J Ahmed, I R Chughtai (PIEAS, Pakistan)
4:10PM	THE VORTEX TRAJECTORIES INVOKED BY AN ARRESTING CYLINDER	GJ Sheard, T Leweke and K Hourigan (Monash University)
4:30PM	CFD ANALYSIS OF IMPINGING AXISYMMETRIC TURBULENT FOUNTAINS	A Godbole, P Cooper, J Norrish and GR Hunt (University of Wollongong)
4:50PM	SHORT WAVE INSTABILITIES OF COUNTER-ROTATING BATCHELOR VORTEX PAIRS	K Ryan, G Sheard and M Thompson (Monash University)
5:10PM	COMPUTATIONAL AERO-ACOUSTICS OF VEHICLE A-PILLAR AT VARIOUS WINDSHIELD RADII	NM Murad, J Naser, F Alam and S Watkins (Swinburne University of Technology)

Thursday - Session 3 (Ballroom 1)

Time	Title	Author
9:50AM	RECENT DEVELOPMENTS IN CFD APPLIED TO VISCOUS AND NON-NEWTONIAN MIXING IN AGITATED VESSELS	PA Tanguy, M Heniche, C Rivera, C Devals and K Takenaka (URPEI, Ecole Polytechnique, Canada)
10:15AM	CFD MODELLING OF PARTIALLY BAFFLED AGITATED VESSELS WITH FREE SURFACES	JP Torré, DF Fletcher, T Lasuye and C Xuereb (The University of Sydney)
11:05AM	POSTER SESSION
11:30AM	OPTIMISATION OF HEAT TRANSFER IN NON-NEWTONIAN FLUIDS WITH CHAOTIC ADVECTION	DR Lester, M Rudman and G Metcalfe (CSIRO MMT)
11:50AM	MODELLING HEAT TRANSFER IN THE DRIPPER ZONE OF A HEAP LEACHING OPERATION	S Trang, D Stephens and M P Schwarz (CSIRO Minerals)
12:10PM	CFD MODELLING OF THE RADIATION AND CONVECTION LOSSES IN THE MTSA RECEIVER	D Chen, Y Liu, R Benito and W Stein (CSIRO MMT)
2:20PM	THE MODELLING OF FIRE SPREAD AND SUPPRESSION WITHIN UNDERGROUND MINE TUNNELS	IS Lowndes, H Morvan, S Silvester, S Pickering, R Hart and Y Cai (University of Nottingham)
2:40PM	THE CONVECTIVE DISPERSION OF FLAMMABLE MIXTURES WITHIN OPEN CYLINDRICAL ENCLOSURES FOLLOWING THE RELEASE OF A FIXED MASS OF GASEOUS FUEL	P Cisse, GA Karim and I Wierzba (University of Calgary)
3:00PM	CFD MODELLING FOR AN ENTRAINED FLOW GASIFICATION REACTOR USING MEASURED "INTRINSIC" KINETIC DATA	SS Hla, DJ Harris and DG Roberts (CRC for Coal in Sustainable Development, CSIRO Energy Technology)
3:20PM	APPLICATION OF A COAL COMBUSTION MODEL IN THE DESIGN OF BLAST PARAMETERS FOR AN IRONMAKING BLAST FURNACE	D Maldonado, P Zulli, YS Shen, BY Guo and AB Yu (Bluescope Steel Research Laboratories)
4:10PM	USING CFD TO REDUCE COMMISSIONING TIME FOR ELECTROSTATIC PRECIPITATORS	RJ Haywood, GJ Brown, LJ Irons, M Stark (Hatch)
4:30PM	SIMULATIION OF INTERFACIAL FLOWS USING FRONT TRACKING APPROACH	MR Behera and K Murali (Indian Institute of technology Madras, India)
4:50PM	THE APPLICATION OF COMPUTATIONAL FLUID DYNAMICS TO THE IMPROVED PREDICTION OF DUST EMISSIONS FROM SURFACE QUARRYING OPERATIONS	SA Silvester, IS Lowndes, J Docx and S Kingman (University of Nottingham)
5:10PM	WAVE-STRUCTURE INTERACTION USING SMOOTHED PARTICLE HYDRODYNAMICS	TB Silvester and PW Cleary (CSIRO MIS)

Thursday - Poster Session

Title	Author
NUMERICAL AND EXPERIMENTAL INVESTIGATION OF THE NEAR WAKE OVER A SLITTY BLUFF BODY	Y Du and W Tang (Huazhong University of Science and Technology)
NUMERICAL STUDY ON PRESSURE DROP FACTOR IN THE VENT-CAP OF CDQ SHAFT	B Song, Y Feng, X Zhang (School of Mechanism Engineering, USTB, Beijing)
CLUSTER INTEGRATION METHOD FOR NON-SPHERICAL GRANULAR PARTICLES	R Meland, IR Gran, J Melheim, ST Munkejord and NE Haugen (SINTEF Energy Research)
COOLING EFFECT ENHANCEMENT IN MAGNETRON SPUTTERING SYSTEM	JS Baek and YJ Kim (Sungkyunkwan University, Korea)
OPERATING CHARACTERISTICS OF AN AGITATOR WITH A DRAUGHT TUBE	JH Hwang and YJ Kim (Sungkyunkwan University, Korea)
THE SIMULATION OF A THERMAL-FLUID SYSTEM USING AN INTEGRATED SYSTEMS CFD APPROACH	JH Kruger and CG du Toit (North-West University, South Africa)
FLUID FLOW CHARACTERISTICS AND RTD ANALYSIS OF A SINGLE STRAND TUNDISH	S Shinde, P Jha, A Mujumdar and M Horio (Tokyo University of Agriculture and Technology)
MULTI-DIMENSIONAL MATHEMATICAL MODEL OF BLAST FURNACE BASED ON MULTI-FLUID THEORY AND ITS APPLICATION TO DEVELOP SUPER-HIGH EFFICIENCY OPERATIONS	J Yagi, H Nogami and AB Yu (Tohoku University Japan)
CFD MODELLING OF NON-UNIQUE STATIONARY REGIMES IN CARBON FILTRATION COMBUSTION	AV Bekker, I Livk and EV Polianczyk (CSIRO Minerals)
ANALYSIS OF THE IN-LINE TUBE BUNDLE HEAT TRANSFER TO THE FOAM FLOW	J Gylys, S Sinkunas, T Zdankus and V Giedraitis (Kaunas University of Technology, Lithuania)
NUMERICAL STUDY ON THE NEAR-FIELD BEHAVIOR OF 3-D LINE INCLINED POSITIVELY BUOYANT JETS IN CROSS FLOWS	J Hu, J Gu, H Han (Dalian University of Technology, China)
ESTIMATION OF NOISE RADIATED DUE TO THE FLOW IN MACHINES USING COMPUTATIONAL FLUID DYNAMICS	B Tallapragada and R Kolluru (College of Engg. & Management, Midnapore, India)
INDUSTRIAL SCALE DIE FILLING AND THE USE OF SHORT SHOTS TO UNDERSTAND THERMAL AND FLOW EFFECTS	PW Cleary, J Ha, M Prakash and T Nguyen (CSIRO MIS)
MODELLING SCALE-DEPENDENT RADIAL TWO-PHASE FLOW OF LIQUID AND GAS IN UNSATURATED POROUS MEDIA	N Su (Central Queensland University)
STUDIES OF AIRFLOW THROUGH A HUMAN NASOPHARYNX AND PHARYNX AIRWAY	HF Li, ZF Tian, JY Tu, W Yang, GH Yeoh, CL Xue and CG Li (RMIT University)
THE FLOW PAST PARTICLES DRIVEN BY A PRESSURE GRADIENT IN SMALL TUBES	GJ Sheard and K Ryan (Monash University)
UNSTEADY STATE SIMULATION OF EULERIAN-EULERIAN MULTIPHASE FLOW IN FCC RISER REACTORS	N Novia, MS Ray and VK Pareek (Curtin University of Technology)

Friday - Session 1 (Ballroom 3)

Time	Title	Author
9:00AM	FLUID MECHANICS CONSIDERATIONS OF GENE AND DRUG DELIVERY TO SKIN AND IMMUNE RESPONSES IN THE BODY	Keynote Lecture Mark Kendall (University of Queensland)
9:50AM	3D PATIENT SPECIFIC MODELS OF THE CIRCLE OF WILLIS	S.Moore and T David (University of Canterbury, New Zealand)
10:15AM	A STUDY OF FLUID AND STRUCTURE INTERACTION IN A CAROTID BIFURCATION	A Bui, K Liffman, B Stanley, M Lawrence-Brown and J Semmens (CSIRO MMT)
11:05AM	HEMODYNAMICS AND STRESS DISTRIBUTION IN A CEREBRAL ANEURYSM PARTIALLY BLOCKED WITH COILS	S Ahmed, ID Šutalo and H Kavnoudias (CSIRO MMT)
11:25AM	HEMODYNAMIC STUDY IN CAVOPULMONARY VASCULAR SYSTEM BY CHARACTERISTIC BASED SPLIT WITH ARTIFICIAL COMPRESSIBILITY SCHEME	K Chitra, S Vengadesan, T Sundararajan and P Nithiarasu (IIT Madras, India.)
11:45AM	LOCAL DEPOSITION SITES OF DRUG PARTICLES IN A HUMAN NASAL CAVITY	K Inthavong, ZF Tian, HF Li, W Yang, C Xue and C Li. (RMIT University)
12:05PM	AN INVESTIGATION OF PULSATILE BLOOD FLOW IN A BIFURCATION ARTERY USING A GRID-FREE METHOD	M Sinnott, PW Cleary and M Prakash (CSIRO MIS)
1:30PM	*THE DETAILS OF CFD DO MATTER*	Keynote Lecture Harry van den Akker (Delft University of Technology)
2:20PM	COMPUTATIONAL SIMULATION OF RED BLOOD CELL DEFORMATION AND RADIAL MIGRATION IN MICROVESSELS	TW Secomb, B Styp-Rekowska and AR Preis (University of Arizona)
2:45PM	FLOW AND PARTICLE DEPOSITION PATTERNS IN A REALISTIC HUMAN DOUBLE BIFURCATION AIRWAY MODEL	LT Choi and Ji Tu (RMIT University)
3:05PM	INSTABILITY, TRANSITION AND RECEPTIVITY OF PULSATILE FLOW IN A STENOTIC TUBE	HM Blackburn, SJ Sherwin (CSIRO MMT)
3:25PM	A CFD STUDY OF FLUID-PARTICLE BEHAVIOUR IN A POROUS VESTIBULE OF A HUMAN NASAL AND PHARYNX AIRWAY	HF Li, JY Tu, DK Shanmugam, CL Xue and CG Li (RMIT)

Friday - Session 2 (Ballroom 2)

Time	Title	Author
9:50AM	CFD FOR SUPERSONIC GAS PROCESSING	B Prast, B Lammers and M Betting (Twister BV)
10:15AM	CFD MODELLING OF DIRECT CONTACT STEAM INJECTION	C Marsh and D Withers (CFD Design & Engineering, NZ)
11:05AM	A COMBINED METHOD FOR SIMULATING GAS-PARTICLE FLOWS IN HIGHLY LADEN CYCLONES	S Pirker and D Kahrimanovic (Johannes Kepler University, Austria)
11:25AM	A THREE-DIMENSIONAL SIMULATION OF A CYCLONE DRYER	P Bunyawanichakul, M P Kirkpatrick, J E Sargison and G J Walker (University of Tasmania)
11:45AM	LARGE EDDY SIMULATION OF DENSE MEDIUM CYCLONE-PREDICTION OF MEDIUM SEGREGATION AND COAL PARTITIONING	M Narasimha, MS Brennan, PN Holtham, A Purchase and TJ Napier-Munn (JKMRC)
12:05PM	SIMULATION OF GAS-SOLID FLOW AND DESIGN MODIFICATIONS OF CEMENT PLANT CYCLONES	V Singh, S Srivastava, R.Chaval, V Vitankar, B Basu, MCAgrawal (Aditya Birla Management Corporation Ltd)
2:20PM	THREE-DIMENSIONAL SPATIAL DEVELOPMENT OF ATOMIZING JETS: THEORY, SIMULATION AND ELEMENTARY PROCESSES	S Zaleski (Pierre & Marie Curie University)
2:45PM	PRESSURE LOSS THROUGH THE BOTTOM END PIECE OF A NUCLEAR FUEL ASSEMBLY	MA Navarro and AAC Santos (Federal University of Minas Gerais, Brazil)
3:05PM	MODELING THE PERFORMANCE OF ULTRAVIOLET REACTOR IN EULERIAN AND LAGRANGIAN FRAMEWORKS	A Sozzi and F Taghipour (University of British Columbia, Canada)
3:25PM	COMPARISON OF RANS MODELLING WITH DNS AND EXPERIMENTAL DATA FOR A CONVERGING-DIVERGING NOZZLE AND A ROTATING CYLINDER ELECTRODE	K Bremhorst, Z Qin and C Jacobs (The University of Queensland)

Friday - Session 3 (Ballroom 1)

Time	Title	Author
9:50AM	A THREE-DIMENSIONAL CFD MODEL FOR COAL BLENDS COMBUSTION: MODEL FORMULATION AND VALIDATION	YS Shen, BY Guo, P Zulli, D Maldonado and AB Yu (University of NSW)
10:15AM	CFD-MODELLING FOR THE COMBUSTION OF SOLID BAILED BIOMASS	M Miltner, A Makaruk, M Harasek and A Friedl (Vienna University of Technology)
11:05AM	SPH MODELLING OF METAL FORGING	J Ha, PW Cleary and M Prakash (CSIRO MIS)
11:25AM	DIRECT NUMERICAL SIMULATION OF COMPLEX MULTI-FLUID FLOWS USING A COMBINED IMMERSED BOUNDARY (IB) AND VOLUME OF FLUID (VOF) APPROACH	NG Deen, M van Sint Annaland and JAM Kuipers (University of Twente, The Netherlands)
11:45AM	UNIAXIAL COMPRESSION TEST AND STRESS WAVE PROPAGATION MODELLING USING SPH	R Das and PW Cleary (CSIRO MIS)
12:05PM	NUMERICAL COMPARISON OF RADIAL BASIS FUNCTIONS AND GENERALISED SMOOTHED PARTICLE HYDRODYNAMICS	J Ha (CSIRO MIS)
2:20PM	PIV MEASUREMENTS AND CFD SIMULATION OF VISCOUS FLUID FLOW IN A STIRRED TANK AGITATED BY A RUSHTON TURBINE	Y Wang, Q Rao, J Fan and W Fei (Tsinghua University, Beijing)
2:45PM	MIXING AND REFINING DYNAMICS OF A GAS-STIRRED THREE-PHASE REACTOR BY CFD ANALYSIS	JE Olsen, H Laux and JB Oian (SINTEF, Norway)
3:05PM	ANALYSIS OF MIXING IN A TWIN-CAM MIXER USING SMOOTHED PARTICLE HYDRODYNAMICS	M Robinson, PW Cleary and J Monaghan (Monash University)